| Router(config)#int fa 0/0 | Enters interface mode for interface fa 0/0 |
| Router(config-if)#no shut | Turns the interface on |
| Router(config-if)#int fa 0/0.1 | Creates subinterface 0/0.1 |
| Router(config-subif)#encapsulation dot1q 1 native | Assigns the native VLAN (usually VLAN 1) to this logical subinterface |
| Router(config-subif)#ip address 192.168.1.1 255.255.255.0 | Assigns an IP address to the subinterface |
| Router(config-subif)#int fa 0/0.10 | Creates subinterface 0/0.10 |
| Router(config-subif)#encapsulation dot1q 10 | Assigns VLAN 10 to this subinterface |
| Router(config-subif)#ip address 192.168.10.1 255.255.255.0 | Assigns an IP address to the subinterface |
| Router(config-subif)# CNTL + Z
|
|
| Router# |
|
0 comments:
Post a Comment